top of page


Manual Isokinetic Stack Monitoring Kit
Models : PEM-SMK-10B, PEM-SMK-10M Based on US EPA methodologies, Manual Stack Monitoring Kit permits sampling for particulate and gaseous pollutants. Most parameters are displayed on a digital display module. Computations are carried out manually by the user.

Control Module
Model PEM-SMK 20 This module is a very compact, light weight, integrated assembly comprising two separate units which are placed one over the other and tightly coupled as a single unit to make it compact and portable.

Sampling Pumps & Pump Interface Module
Various types of sampling pumps to meet varied sampling requirements. Model RVD-150, Mono Block, Pump Interface Module (for use with SMS 4)

Sampling Probes
In stack emission monitoring, sampling of stack gas is a very important and a commonly employed technique. In order to ensure a reliable analysis, it is essential that the sample gas is extracted free of ambient gas leaking into the system and at the same time the dew point of the sample must remain stable. A sampling probe fulfills this dual objective by acting as an interface between the stack and the analysis system.
A sampling probe comprises of a sampling nozzle, a sample transport pipe and in some cases a filter holder in addition to a Pitot tube and a stack temperature sensor.
Probe design is dictated by specific application. Probes are designed with different materials and may be heated or unheated.
We design and manufacture a variety of probe accessories to suit various applications and sampling conditions.
A sampling probe comprises of a sampling nozzle, a sample transport pipe and in some cases a filter holder in addition to a Pitot tube and a stack temperature sensor.
Probe design is dictated by specific application. Probes are designed with different materials and may be heated or unheated.
We design and manufacture a variety of probe accessories to suit various applications and sampling conditions.

Sampling Nozzles
Large selection of Nozzles of different shapes ( right angle, straight and button-hook Nozzles) in multiple materials. Determining the size needed for isokinetic sampling depends on the stack gas velocity. Determining the material depends on the stack temperature and the sampling method. We provide technical support and can help with configuration.

Filter Holders
Filter Holders SS304, SS216 and other materials

Sample Transport Pipe
We provide various types of sample transport pipes of different materials and lengths. These may be heated or unheated.

Heated Probes with Liners
We manufacture heated probes with different liners viz. Glass, PTFE and Stainless Steel. All the probes are sheathed with aluminum and provided with an electronically controlled heater to maintain the probe at specified temperature.
The heated probes are designed to facilitate easy in-field removal of liners for cleaning, rinsing etc. Heated Sampling probes are available in standard lengths of 1, 1.5 and 2 meters. On special request they can be provided in modular form which can be joined to increase their length. Models PEM-HGLP-3S, PEM-HTLP-3S, PEM-HSLP-3S, PEM-HSSP-1
The heated probes are designed to facilitate easy in-field removal of liners for cleaning, rinsing etc. Heated Sampling probes are available in standard lengths of 1, 1.5 and 2 meters. On special request they can be provided in modular form which can be joined to increase their length. Models PEM-HGLP-3S, PEM-HTLP-3S, PEM-HSLP-3S, PEM-HSSP-1

Pitot Tube and Extensions
We manufactures a variety of Pitot Tubes and extension pipes for the same. We also manufacture and supply L type Pitot tubes of various lengths and materials of constructions

Stack Gas Temperature Sensor
Sampling of stack flue gases with temperature up to 1200°C

Heated Filter Box
In Method 5 and other methods for out-of-stack measurement of stack emissions, when sampling for particulate matte, it is mandatory for the sample to be drawn iso-kinetically. The sample is drawn through a probe and is collected on a glass fiber filter. In order to prevent loss of particulates to water that may form due to condensation of water vapour present in the sampled stack gas , the probe and the filter are required to be maintained typically at a temperature of 120 ± 14 °C (248 ± 25 °F).
This necessitates the filter holders also to be maintained at the above mentioned temperatures in addition to heating the sampling probes.
Polltech's heated filter box Model PEM–HFB2 meets these requirements adequately. It comprises a double walled thermally insulated, electrically heated compartment. It is capable of accepting a glass or PTFE filter holders of various sizes. Uniform heating is provide by a large area sealed tubular heater element. Heated probes are held in place by a strong SS probe clamp. An independent electronic module comprising two digital electronic temperature controllers control and display the temperatures in real time.
This necessitates the filter holders also to be maintained at the above mentioned temperatures in addition to heating the sampling probes.
Polltech's heated filter box Model PEM–HFB2 meets these requirements adequately. It comprises a double walled thermally insulated, electrically heated compartment. It is capable of accepting a glass or PTFE filter holders of various sizes. Uniform heating is provide by a large area sealed tubular heater element. Heated probes are held in place by a strong SS probe clamp. An independent electronic module comprising two digital electronic temperature controllers control and display the temperatures in real time.

Moisture Removal Device
Metal condenser, Coiled Glass Condenser, Silica Gel Trap (Glass), Silica Gel Trap (acrylic)

Umbilical Cords and Inter Connection Tubes
Unheated Umbilical Chord, Heated Umbilical Chord, Interconnecting Tubes

Glass Impingers
Straight ends for flexible tubes, Ball & Cup with various capacities

PTFE Impingers
Straight ends for flexible tubes / Swagelok with various capacities
bottom of page